m-Nitrohydrocinnamic acid - Names and Identifiers
m-Nitrohydrocinnamic acid - Physico-chemical Properties
Molecular Formula | C9H9NO4
|
Molar Mass | 195.17 |
Density | 1.343±0.06 g/cm3(Predicted) |
Melting Point | 110-112°C |
Boling Point | 379.4±17.0 °C(Predicted) |
Flash Point | 168.9°C |
Solubility | soluble in Methanol |
Vapor Presure | 1.97E-06mmHg at 25°C |
Appearance | powder to crystal |
Color | White to Light yellow |
pKa | 4.50±0.10(Predicted) |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.583 |
m-Nitrohydrocinnamic acid - Risk and Safety
Hazard Symbols | C - Corrosive
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
HS Code | 29163990 |
Hazard Class | CORROSIVE |
m-Nitrohydrocinnamic acid - Introduction
3-(3-Nitrophenyl)propionic acid is an organic compound. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance is a white crystalline solid.
-has a high melting point and boiling point.
-Soluble in organic solvents such as ethanol and acetone, insoluble in water.
Use:
- 3-(3-Nitrophenyl)propionic acid is an organic synthetic intermediate, which is widely used in pharmaceutical and pesticide industries.
-It can be used to synthesize plant growth regulators, such as ethylene male ester.
-Can also be used to make dyes and coatings.
Method:
- 3-(3-Nitrophenyl)propionic acid can be prepared by carboxymethylation of carbon atoms.
-A commonly used method is to react 3-nitrobenzaldehyde and acetone under alkali catalysis to produce the target product.
Safety Information:
- 3-(3-Nitrophenyl)propionic acid is an organic compound and has a certain degree of danger.
-It may irritate the eyes and skin and should be avoided.
-During use, pay attention to personal protection and ensure a well-ventilated working environment.
-should be stored away from the fire and oxidant, to avoid the production of combustibles.
-Seek immediate medical help if you feel unwell when taken by mistake or inhaled.
Please note that for laboratory and industrial applications, the relevant safety procedures and regulations should be carefully read and followed before using this compound.
Last Update:2024-04-09 15:17:53